A+ Server 4042G-72RF4
  A+ Products  Systems  Tower   [ 4042G-72RF4 ]








Integrated Board
H8QG7-LN4F


Key Features

1. Four AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 1TB DDR3 1600MHz ECC

    Registered DIMM; 32x DIMM sockets
3. 2x PCI-E 2.0 x16 slots

    2x PCI-E 2.0 x8 slots
4. LSI 2208 8-port 6 Gbps SAS2 controller;

    HW RAID 0, 1, 5, 6, 10, 50, 60

    (1GB cache) (50, 60 optional; additional

    parts required)
5. 5x Hot-swap SAS/SATA Drive Bays
6. 1400W High-efficiency

    Redundant Digital Power Supplies

    Platinum Certified (94%)
7. Integrated IPMI 2.0 with Dedicated LAN


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
4042G-72RF4
  • A+ Server 4042G-72RF4 (Black)
 
Motherboard
Super H8QG7-LN4F
 
Processor/Chipset
CPU
  • Quad 1944-pin Socket G34
  • Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD SR5690/SR5670/SP5100 Chipset
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory
Memory Capacity
  • 32 DIMM sockets
  • Support up to 1TB Registered ECC or 256GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 32 DIMMs
  • Quad channel memory bus
  • For Dual or Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
  • See Detailed Memory Support Matrix
Memory Type
  • Registered ECC or unb. ECC / non-ECC DDR3 1600/1333/1066 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
SAS
  • LSI 2208 8-port SAS2 controller
  • HW RAID 0, 1, 5, 6, 10, 50, 60 (1GB cache)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® I350 controller, 4-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
Super I/O
  • Winbond® W83527 chip
VGA
  • Matrox G200 16MB DDR2 graphics
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
SAS
  • SAS2 x8
LAN
  • 4 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x internal headers-4x ports, and 1x type A
VGA
  • 1x VGA port
Serial Ports
  • 1x serial port header
IPMI
  • 1x dedicated IPMI LAN port; WPCM450
Others
  • 1 SATA DOM power connector, TPM header
 
Expansion Slots
PCI-Express
  • 2x PCI-E 2.0 x16 slots
  • 2x PCI-E 2.0 x8 slots
 
System BIOS
BIOS Type
  • 16Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • Tower / 4U Rackmountable
Model
  • CSE-748TQ-R1K43B
 
Dimensions
Height
  • 7.0" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • 87 lbs (39.5 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Drive Bays
Hot-swap
  • 5x 3.5" Hot-swap SAS/SATA Drive Bays and 3x 5.25?Peripheral Drive Bays
  • SAS or enterprise SATA HDD only recommended
Peripheral Bay(s)
  • 2x 5.25" Peripheral Drive Bay
  • 1x 5.25" Bay For Floppy Drive
 
SAS / SATA Backplane
SAS / SATA Hard Drive Backplane with SES2
 
System Cooling
Fans
  • 3x 7200 RPM Hot-Swappable Cooling Fans
  • 3x 8200 RPM Hot-Swappable Rear Exhaust Fan
 
Power Supply
Redundant 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage
  • 100-240 V, 50-60 Hz, 15 Amp max
+12V
  • 100 Amp/115 Vac
  • 117 Amp/230 Vac
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 25 Amp
  • -12V: 0.6 Amp
Certification Platinum Level Certified  

  Platinum Certified
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • CPU 4-Phase-switching voltage reulator
FAN
  • Total up to 9-fan status tachometer monitoring
  • Up to nine 3-pin fan headers
  • Status monitor for speed control
  • Support 3-pin fans with fan-speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • PC Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8QG7-LN4F 1 Super H8QG7-LN4F Motherboard
Chassis CSE-748TQ-R1400B 1 4U Chassis
Air Shroud MCP-310-74802-0B 1 Mylar air shroud for H8QGi/6-F and H8QMi/3-2
Cable 1 CBL-0188L-02 1 MINI SAS-4 SATA,INT,64/54/44/34CM,64CM SB,30AWG
Cable 2 CBL-0343L-01 1 MINI SAS-4 SATA,INT,76/66/54/45CM,66CM SB,30AWG
Heatsink / Retention SNK-P0043P 4 2U Passive CPU HS for AMD Socket G34
IO Shield 1 MCP-260-00060-0N 1 Standard I/O shield for H8QG7+ -LN4F with EMI Gasket


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00080-0B - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Cable(s) CBL-0390L - 20-pin PWS to Two 6+2pin GPU PWS
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Certain products may not be available in your region