 | |
 | | SYS-6036T-TF | - SuperServer 6036T-TF (Black)
| | | | | CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP) | | QPI | | | | | | Memory Capacity | - 12x 240-pin DIMM slots
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| | Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
| | | | | Chipset | - Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - 2x Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | | | Super I/O | | | | | | PCI-Express | - 4 (x8) PCI-E 2.0 slots
- 1 (x4) PCI-E 2.0 slot
- 1 (x4) PCI-E slot
| | | | | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 4x USB rear ports
- 2x USB on-board (TypeA)
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
| | | | | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
| | | | |
| | Form Factor | | | Model | | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| | Ports | | | | |
| | Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
| | Peripheral Bay(s) | - 2x 5.25" Peripheral Drive Bay
- 1x 3.5" Bay
| | | | | SAS / SATA Backplane w/ Enclosure Management | | | |
| | Fans | - 4x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
| | Shroud | | | | |
| 650W AC-DC high-efficiency power supply w/ PFC
Redundant Cooling | | AC Voltage | - 100 - 240V, 60-50Hz, 8.3 - 3.5 Amp
| | +5V | | | +5V standby | | | +12V | | | -12V | | | +3.3V | | | Certification |  Certified | | | | | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
| | Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
| | | RoHS
| | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| |
