X9DR7-LN4F

Super Micro Computer, Inc.
Contact Us

Search

MySupermicro

  Products   Motherboards   Xeon® Boards   [ X9DR7-LN4F ]

Supermicro motherboard X9DR7-LN4F
Key Features
1. Dual socket R (LGA 2011) supports
    Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
2. Intel® C602 chipset; QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz;
    16x DIMM slots
4. Expansion slots:
    2 PCI-E 3.0 x16 and 4 PCI-E 3.0 x8
5. Intel® i350 GbE controller (4 ports)
6. 8x SATA2 and 2x SATA3 ports
7. 8x SAS2 (6Gb/s) ports via Broadcom 2308
8. Integrated IPMI 2.0 and KVM with
    Dedicated LAN
9. 7x USB 2.0 ports
    (2 rear, 4 via header + 1 Type A)
   
 
Links & Resources
Tested Memory List
Tested HDD / SSD List
Motherboard Manual
Quick Reference Guide
Update Your BIOS
BMC/IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
Heat Sink Compatibility
OS Compatibility

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X9DR7-LN4F -O
  • X9DR7-LN4F (Standard Retail Pack)
MBD-X9DR7-LN4F -B
  • X9DR7-LN4F (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12.1" x 13" (30.7cm x 33.2cm)
 
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600
        and E5-2600 v2 family
        (up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
     64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
  • SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA
  • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SAS
  • SAS2 (6Gb/s) via Broadcom 2308
  • SW RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Gigabit Ethernet (4 ports)
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
AHCI SATA
  • 2x SATA 3.0 ports (6Gbps)
  • 4x SATA 2.0 ports (3Gbps)
SCU SATA
  • 4x SATA 2.0 ports (3Gbps)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 7 USB 2.0 ports total
    (2 rear + 4 via header + 1 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 2 Fast UART 16550 ports (1 rear, 1 header)
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Chassis (Optimized for X9DR7-LN4F )
2U Chassis
  • CSE-825TQ-R740LPB
  • CSE-826BA-R1K28LPB
  • CSE-826BA-R920LPB
  • CSE-826BE16-R1K28LPB
  • CSE-826BE16-R920LPB
  • CSE-826BE26-R1K28LPB
  • CSE-826BE26-R920LPB
3U Chassis
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

 
Expansion Slots
PCI-Express
  • 2x PCI-E 3.0 x16 slots
  • 4x PCI-E 3.0 x8 slots

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DR7-LN4F MBD-X9DR7-LN4F 1 X9DR7-LN4F Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 2 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
I/O Shield MCP-260-00042-0N 1 STD I/O shield for X9 socket R server MB with Gasket
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
AOM-TPM-9655V
AOM-TPM-9655H
- TPM module with Infineon 9655, RoHS/REACH,PBF;
Vertical or Horizontal depends on the server
SuperDOM - - Supermicro SATA DOM Solutions [Details]
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.