X6DH3-G2
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DH3-G2 ]
X6DH3
  • Lowest Cost SAS Solution
  • Highest Data Availability Bandwidth

Key Features
1. Dual Intel® 64-bit Xeon® Support,
    up to 3.80 GHz, 800 MHz FSB
2. Intel® E7520 Chipset
3. Up to 16GB DDR2 400 SDRAM
4. Dual Intel® 82541PI Single-Port Gigabit
    Ethernet Controllers
5. Adaptec AIC-9410 8-Port Serial
    Attached SCSI (SAS) Controller
6. 2x SATA Ports via 6300ESB
    SATA Controller
7. 2 (x8) PCI-Express,
    1x 64-bit 133MHz PCI-X,
    2x 64-bit 100MHz PCI-X,
    1x 32-bit PCI
8. IPMI 2.0 Support
9. SAS Zero-Channel RAID (opt.)

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
SAS Cable Compatibility
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DH3-G2-O
  • X6DH3-G2 (Standard Retail Pack)
MBD-X6DH3-G2-B
  • X6DH3-G2 (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13.05" (30.5cm x 33.2cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 16 GB DDR2 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E7520 chipset
  • MCH + 6300ESB + PXH/V + 82541PI
SAS
  • Adaptec AIC-9410: Adaptec 8-port SAS Controller
  • RAID 0, 1, 10, JBOD support
SATA
  • 6300ESB 2-port SATA Controller
SAS ZCR
  • RAID 0, 1, 5, 10, and JBOD support
  • Support for Zero-Channel RAID
  • (Card not included)
IPMI
Network Controllers
  • Dual Intel® 82541PI Single-Port Gigabit Controller
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
Chassis ( Optimized for X6DH3-G2 )
2U
  • SC823T-R500RC
  • SC823T-550LP
3U
Tower / 4U Rackmount
  • SC743T-R760
  • SC743T-650
Important Chassis Notes
  • To ensure system stability with non-Paxville CPUs, a 420W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • To ensure system stability with Paxville Dual Core CPUs, a 500W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 2 (x8) PCI-e slots
PCI-X
  • 1x 64-bit 133MHz PCI-X (3.3V) slot
  • 2x 64-bit 100MHz PCI-X (3.3V) slots
PCI
  • 1x PCI slot
 
Input / Output
Serial ATA / SAS
  • Two SAS connectors support up to 8 SAS drives
  • Two SATA connectors support 2 SATA drives
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 header
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
  • SuperDoctor® III
  • Watch Dog<
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
FAN
  • Total of four 4-pin fan headers and four 3-pin fan headers
  • 8x fans with tachometer status monitoring
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Parts List
  Part Number Qty Description
X6DH3-G2 MBD-X6DH3-G2-O 1 X6DH3-G2 Motherboard
Manual(s) MNL-0804 1 Motherboard Manual for X6DH3-G2
I/O Cables CBL-0010L-01
CBL-0022
CBL-0036
CBL-0097
CBL-0083
1
1
1
2
1
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
1-to-4 SAS Cable
2-port USB Cable
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later
I/O Shield CSE-PT7 1 Motherboard I/O Shield

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.