 |  | | MBD-PDSMi-LN4-O | - PDSMi-LN4 (Standard Retail Pack)
| | MBD-PDSMi-LN4-B | | | | | | Form Factor | | | Dimensions | - 12.0" width x 9.6 " length , (30.5cm x 24.4cm), 6 layers
| | | | | CPU | - Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor up to 3.8GHz
- Supports an Intel® Pentium® 4 Extreme Edition processor up to 3.72GHz
- Supports an Intel® Celeron® D processor with 256KB L2 Cache up to 3.06GHz
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
- Will not support E2000 processors
| | System Bus | - 1066 / 800 / 533 MHz system bus
| | | | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 667/533MHz memory (Dual Channel)
| | Memory Type | - DDR2 667/533MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | | | | Chipset | - Intel E7230 (Mukilteo) chipset
- ICH7R + PXH-V + Intel® 82573V/L
| | Serial ATA | - Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only) - Adaptec:
RAID 0 (Two, three, four drives only)
RAID 1 (Two hard drives only) | | IPMI | | | Network Controllers | - Dual double-stack ports using Intel® 82573V/L Gigabit PCI-Express Ethernet, Four ports total
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
| | VGA | - On-board ATI RageXL graphics, 8MB
| | Super I/O | | | Clock Generator | | | | | | Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- IDE Master / Slave 2 ports
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
- White Connector for Compact Flash (CF, 40-pin IDE connector) card only
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 4x USB 2.0 compliant / 1.1 compatible
- 2x internal USB headers
- 2x rear ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
| | Parallel Port | - 1x ECP / EEP Parallel Header
| | | | | | Mini-1U | | SC733T-645 | 4U / Tower | | | Important Note | - Only this Supermicro 1U chassis is recommended for this Network Building Block Solution
| | | | | PCI-X | - 1x 64-bit PCI-X 133MHz slot
| | PCI | - 1x 32-bit 33MHz PCI (5V) slot
| | | | | BIOS Type | - 8Mb Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
| | | | | Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
| | Power Configurations | - ACPI/APM Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
| | | | | CPU | - Monitors for CPU Cores, +1.5V, +3.3V, +5, ±12V, +5V Standby
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
| | FAN | - Fan Speed Control
- Total of five proprietary fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
| | LED | - +5V Standby Alert LED
- Suspend-state indicator LED
| | Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
| | | |
| | FCC | - Passed to meet FCC standard requirement
| |
