 | |
 | | MBD-C2SBM-Q-O | - C2SBM-Q (Standard Retail Pack)
| | MBD-C2SBM-Q-B | | | | | | Form Factor | | | Dimensions | - 9.6" x 9.6 ", (24.4cm x 24.4cm)
| | | | | CPU | - Single LGA775 Socket
- Supports Intel® Core™2 Extreme QX9000/QX6000 series
- Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series
- Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel® Pentium® E5000/E2000 series
- Supports Intel® Celeron® E1000 and 400 series
| | System Bus | - 1333 / 1066 / 800 MHz system bus
| | | | | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel)
| | Memory Type | - DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2 GB
| | Memory Voltage | | | | | | Chipset | | | Serial ATA | - Intel® ICH9DO SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
| | Network Controllers | - 1 x Intel® 82566DM Single Port Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
| | Audio | - RealTek ALC883 High Definition 7.1 Channel Audio
| | Video | | | Super I/O | | | Clock Generator | | | | | | Serial ATA | - Four Serial ATA ports ( 3Gbps performance)
| | IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | LAN | | | USB | - 11x USB 2.0/1.1 compliant (6x ports + 2x headers + 1 on-board connectors)
- 6 rear ports, 5 on-board
| | Audio | - Line-in / Line-out / Microphone Ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 2x Fast UART 16550 serial port
- 2x Serial Header
| | | | | | Mid-Tower | | | Important Note | - To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required.
| | | | | PCI-Express | - 1 (x16) PCI-e slot
- 1 (x4) (using x8) PCI-e slot
| | PCI | - 2x 32-bit 33MHz PCI (5V) slots
| | | | | BIOS Type | - 16Mb SPI Flash EEPROM with Phoenix BIOS®
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | Software | | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
- Suspend to RAM (STR)
| | | | | Voltage | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
| | FAN | - Total of three 4-pin fan headers
- 3 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
| | LED | - CPU / System Overheat LED
- Standby alert LED
| | Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- TPM 1.2
| | | |
| | Environmental Spec. | - Operating Temperature: 0° to 55°C
- Non-operating Temperature: -40° to 85°C
- Operating Relative Humidity: 15% to 95% (non-condensing)
- Non-operating Relative Humidity: 15 to 90% (non-condensing)
| |
