A+ Server 2022TG-HIBQRF
  A+ Products  Systems   2U   [ 2022TG-HIBQRF ]








Integrated Board
H8DGT-HIBQF


Key Features (per node)

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
2. Up to 512GB DDR3 1600MHz ECC

    Registered DIMM; 16x DIMM sockets
3. 1x Low-profile PCI-E 2.0 in x16 slot

    (For add-on card up to 5.9"in length)
4. Dual-port GbE LAN Controller, 5x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI 2.0)
5. 3x Hot-swap SATA Drive Bays

    (RAID 0, 1)
6. Mellanox ConnectX-2 QDR Infiniband 40Gbps Controller w/ QSFP connector
7. 1400W High-efficiency Redundant

    Power Supplies; Gold Certified


Available Colors: Black    


 BIOS
 IPMI
 


Product SKUs
AS-2022TG-HIBQRF
  • A+ Server 2022TG-HIBQRF (Black)
 
Motherboard
Super H8DGT-HIBQF
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • AMD chipset SR5670 + SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W)
 
System Memory (per node)
Memory Capacity
  • 16 DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices (per node)
SATA
  • AMD SP5100 (RAID 0, 1)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Infiniband
  • Mellanox ConnectX-2 QDR Infiniband 40Gbps Controller w/ QSFP connector
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots (per node)
PCI-E
  • 1x PCI-E 2.0 x16
 
Input / Output (per node)
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 5x USB 2.0 ports
  • 2x Rear, 2x header, and 1x Type A
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
System BIOS (per node)
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 2U Twin2 Rackmount
Model
  • SC827H-R1400B
 
Dimensions (stand-alone chassis / package)
Height
  • 3.47" (88mm) / 11.22" (285mm)
Width
  • 17.25" (438mm) / 26.38" (670mm)
Depth
  • 28.5" (724mm) / 39.76" (1010mm)
Gross Weight
  • 85 lbs / 38.6 kg
Available Colors
  • Black
 
Front Panel
Buttons
  • 4x Power On/Off button
  • 4x UID button
LEDs
  • 4x Power status LED
  • 4x UID LED
  • 4x Network activity LEDs
  • 4x System overheat / fan failed /

     power failed LED
 
Drive Bays
HDD Bay
  • 12x Hot-swap 3.5" SATA HDD

    (3 for each node)
  • Enterprise SATA HDD only recommended
 
System Cooling
Fans
  • 4x 80mm PWM cooling fans
 
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified

  Gold Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 4-fan status tachometer monitoring
  • Up to four 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
 
Operating Environment / Compliance
RoHS

  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard MBD-H8DGT-HIBQF 4 Super H8DGT-HIBQF Motherboard
Chassis CSE-827H-R1400B 1 2U Chassis
Air Shroud MCP-310-82711-0B 4 Plastic air shroud for H8 DP (G34), SC827, SC808 share
Backplane BPN-ADP-4SATA-H8 4 BPN-ADP-4SATA-H8-O-P
CD CDR-APLUS2 1 DRIVER CD FOR AMD SP5100 CHIPSET MB
Heatsink / Retention SNK-P0042P 8 1U Passive CPU HS for AMD Socket G34
Riser Card RSC-R1U-E16R 4 RSC-R1U-E16R
Backplane BPN-SAS-827B 1 Support 12x 3.5" SAS/SATA hot-swap HDD


Optional Parts List
  Part Number Qty Description
Adaptor HDD carrier MCP-220-00043-0N - Adaptor HDD carrier to install 2.5" HDD in 3.5" HDD tray
Hide Parts List



Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.