A+ Server 4020A-8R / 4020A-8RB
  A+ Products  Systems   Tower   [ 4020A-8R / 4020A-8RB ]








Integrated Board
Super H8DA8


Key Features

1. Dual AMDl® Opteron™ Support,

    (Dual Core Ready)

    1000 MHz HyperTransport Link
2. Up to 16GB DDR 400 SDRAM (or)

    Up to 16GB DDR 333 SDRAM (or)

    Up to 32GB DDR 266 SDRAM
3. 2x 64-bit 133/100MHz PCI-X,

    2x 64-bit 66MHz PCI-X,

    2x 32-bit 33MHz PCI
4. AMD® 8131 PCI-X Tunnel /

    AMD 8111 I/O Hub Chipset
5. 8x 3.5" Hot-swap SCSI Drive Bays
6. Dual-port Gigabit LAN /

    Ethernet Controller
7. 760W Triple Redundant Power Supply

    With I2C Built-in


Available Colors: Black     Beige    


 Drivers & Utilities       BIOS       Manuals  Tested Memory List     



Product SKUs
AS-4020A-8R
  • A+ Server 4020A-8R (Beige)
AS-4020A-8RB
  • A+ Server 4020A-8RB (Black)
 
Motherboard
Super H8DA8
 
Processor/Chipset
CPU
  • Dual 940-pin ZIF Sockets
  • Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
  • VRM x3
Chipset
  • AMD 8131 HyperTransport PCI-X Tunnel
  • AMD 8111 HyperTransport I/O Hub
 
System Memory
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 400 MHz memory or
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Single or Dual (recommended) channel memory
  • For Single CPU: Memory must be populated in CPU1 DIMMs only
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SCSI
  • Adaptec AIC-7902W Controller
  • Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives)
  • Host RAID 0, 1, 10, JBOD
Zero Channel RAID
  • Support for Zero-Channel RAID with Adaptec 2010S SCSI ZCR Card
  • (Card not included)
IPMI
  • 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
  • 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI)
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • Broadcom® 5704 Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
 
Expansion Slots
PCI-X
  • 2 64-bit 133/100MHz PCI-X (3.3V) slots
  • 2 64-bit 66MHz PCI-X (3.3V) slots
PCI
  • 2 32-bit 33MHz PCI (5V) slots
IPMI
  • IPMI 2.0 expansion slot
 
Input / Output
IDE
  • Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • Up to 5 USB Ports 1.1 Compliant
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
Chassis
Form Factor
  • Tower / 4U Rackmountable
  • Optional Rackmount Kit (CSE-PT26)
Model
 
Dimensions
Height
  • 7.0" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • 65.5 lbs (29.71kg)
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Drive Bays
Hot-swap
  • 8x 3.5" Hot-swap SCSI Drive Bays
Peripheral Bay(s)
  • 3x 5.25" Peripheral Drive Bays
 
SCSI Backplane
Single-Channel SCSI Hard Drive Backplane
 
System Cooling
Fans
  • 4x 5000 RPM Hot-Swappable Cooling Fans
  • 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
Power Supply
760W Triple-Redundant AC power supply with PFC

[ 24-pin, (8-pin, 4-pin)=12V ]
AC Voltage
  • 100 - 240V, 50-60Hz, 14 Amp Max
DC Output
  • 5V + 3.3V ≤ 200W
+5V
  • 36.0 Amp
+5V standby
  • 3.5 Amp
+12V
  • 50.0 Amp (combined)
-12V
  • 1.0 Aamp
+3.3V
  • 36.0 Amp
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
  • Up to 8 fan status
  • Supports System Management Utility
FAN
  • Total up to 8-fan status
  • 3-pin fan speed control or
  • 4-pin Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
LED
  • Overheat LED
Other Features
  • Chassis Intrusion Header
 
System BIOS
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • DMI 2.3
  • ACPI 2.0
  • Fan Speed Control
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8DA8

CSE-743S1-R760(B)
1

1
Super H8DA8 Motherboard

4U SC743S1-R760 Chassis (B = Black)
Backplane CSE-SCA-743S1 1 Single-channel SCSI Hard Drive Backplane
Bezel Filter - 1 Front Bezel Filter
Cable(s) CBL-0037L-U320

CBL-0039L

CBL-0040L

CBL-0062L

CBL-0084

CBL-0087

CBL-0209L
1

1

1

1

1

1

4
6" 2-Drop Ultra320 SCSI Cable

Round IDE Cable

Round Floppy Cable

12V 18-pin to 18-pin Power Connector Extension Cable

6" Front Control Split Cable

20" 16-pin to 16-pin Round Ribbon Cable

210mm 4-pin to 3-pin Fan Power Cable
Drive Tray(s) CSE-PT17(B) 8 1" SCA drive tray (B = Black)
Fan(s) FAN-0072

FAN-0081
4

2
5000 RPM Hot-swappable Cooling Fan

5000 RPM Rear Cooling Fan
Heatsink Components BKT-0004

BKT-0005
2

2
Heatsink Mounting Plate

Heatsink Retention
I/O Shield CSE-PT55 1 Color I/O Shield with Gasket
Power Supply PWS-0050 1 SP762-TS 760W Power Supply (with 3 PWS-0050M power modules)
Air Shroud CSE-PT54 1 Air Shroud
Optional Parts List
  Part Number Qty Description
Heatsink / Retention SNK-P0013 - Passive Copper Heatsink for 2U Chassis and above

(Please refer to our Thermal Components Matrix)
Mounting Rails CSE-PT26 - Chassis Mounting Rails


**4GB memory modules not fully tested due to limited availability
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed: