H8SSL-i2
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8SSL-i2 ]
H8SSL-i2
• Best Single Opteron CPU Solution
• Most Cost Effective Dual Core Workstation
• High-End A+ ServerBoard

Key Features
1. Single AMD® Opteron™ 1000 Series
    (Socket AM2) Support,
    800 MHz HyperTransport Link
2. ServerWorks HT1000 Chipset
3. Up to 8 GB DDR2 800/667/533 SDRAM
4. Dual-port Broadcom BCM5704C Gigabit
    LAN / Ethernet Controller
5. Up to 4 SATA drives via HT1000
6. 1 64-bit PCI-X 133MHz
    2 32-bit PCI 33MHz
7. ATI ES1000 Graphics & VGA port
8. 1UIPMI 2.0 Support

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities

RoHS 5/6

Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-H8SSL-i2-O
  • H8SSL-i2 (Standard Retail Pack)
MBD-H8SSL-i2-B
  • H8SSL-i2 (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12.0" x 8.0" (30.5cm x 20.3cm)
 
Processor/Chipset
CPU
  • Single 940-pin AM2 Socket
  • Supports one Quad-Core AMD Opteron™ 1000 Series
    (Socket AM2) processor
    NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor
System Bus
  • 800MHz HyperTransport
Chipset
  • ServerWorks HT1000
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB DDR2 800/667/533 MHz memory
  • Single or Dual (recommended) channel memory
Memory Type
  • DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA/100
IPMI
Network Controllers
  • Broadcom BCM5704C Dual Gigabit Ethernet Controller
  • Supports 1000BASE-T, RJ45 output
VGA
  • ATI ES1000 Graphics Controller
    16MB Graphics & VGA port
Super I/O
  • Winbond 87427
 
Input / Output
SATA
  • Up to four SATA devices
IDE
  • Single ATA 100 EIDE channels support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports ATA/100
Floppy
  • 1 Floppy port; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB Rear Ports
  • 4 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
VGA
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 Header
Chassis ( Optimized for H8SSL-i2 )
Important Chassis Notes
  • To ensure system stability, a 300W (minimum) ATX power supply
    [4-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-X
  • 1 64-bit 133MHz PCI-X (3.3V) slot
PCI
  • 2 PCI 32-bit, 33MHz expansion slots
 
System BIOS
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
  • SST-49LF004B BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support
  • Hardware BIOS Virus Protection
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
Power Configurations
  • ACPI Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Main Switch Override Mechanism
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +5V, ±12V, 5.5V Standby, 2.5V Standby, VBAT
  • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
  • CPU switching voltage regulator
FAN
  • Total up to five 3-pin fan headers
  • 5 Fan Status Tachometer monitoring
  • Status Monitor for Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • I2C temperature sensing logic
LED
  • CPU / Overheat LED
  • Suspend-state indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Header
  • Chassis Intrusion Detection
  • SDDC Support
  • Chipkill Support
 
Operating Environment / Compliance
RoHS

RoHS 5/6
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8SSL-i2 MBD-H8SSL-i2 -O 1 H8SSL-i2 Motherboard
Retention BKT-0017L 1 BACKPLATE FOR AMD AM2 CPU ROHS
Retention BKT-0018L 1 RETENTION MODULE FOR AMD AM2 CPU ROHS
I/O Cable 1 CBL-0044L 4 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 3 CBL-022L 1 ATX FLOPPY CABLE 3 HEADERS PB FREE
I/O Cable 4 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
Driver Disk CDR-A+SWKS 1 CDR-A+SWKS (DRIVER FOR A+ SERVERWORKS CHIPSET MB)
I/O Shield CSE-PT7L 1 I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE
Optional Parts List
  Part Number Qty Description
Heatsink SNK-P0026
SNK-P0027P
-
-
CPU Heatsink for 1U Systems
CPU Heatsink for 2U Systems
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 1000, Opteron, Socket AM2