H8DSL-HTi
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8DSL-HTi ]
H8DSL-HTi
  • Best Dual Opteron CPU Solution
  • Cost Effective Dual Opteron Dual Workstation

Key Features
1. Dual AMD® Opteron™ Support,
    (Dual Core Ready)
    1000 MHz HyperTransport Link
2. ServerWorks HT1000 Chipset
3. Up to 16GB DDR400 SDRAM (or)
    Up to 32GB DDR333 SDRAM (or)
    Up to 32GB DDR266 SDRAM
4. Dual-port Broadcom BCM5704C Gigabit
    LAN / Ethernet Controller
5. Up to 4 SATA drives via HT1000
6. 1 64-bit PCI-X 133MHz
    1 HyperTransport(HTX) Link,
    (HTX Support via Riser Card)
7. ATI RageXL 8MB Graphics & VGA port
8. 1UIPMI 2.0

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs
MBD-H8DSL-HTi-O
  • H8DSL-HTi (Standard Retail Pack)
MBD-H8DSL-HTi-B
  • H8DSL-HTi (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 9.6" x 13.05 " (24.4cm x 33.2cm)
 
Processor/Chipset
CPU
  • Dual 940-pin ZIF Sockets
  • Supports two Dual-Core AMD Opteron™ 200 Series processor
  • 3 phase VRM
Chipset
  • ServerWorks HT1000 I/O Hub
 
System Memory
Memory Capacity
  • Eight 184-pin DIMM sockets support:
  • Up to 16 GB DDR 400 MHz memory OR
  • Up to 32 GB DDR 333 MHz memory OR
  • Up to 32 GB DDR 266 MHz memory
  • Single or Dual (recommended) channel memory support
Memory Type
  • DDR 400 / 333 / 266MHz buffered(Registered)
  • SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
  • SATA RAID 0, 1, 10
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100
IPMI
  • 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
  • Remote Management Module
  • (Card not included)
Network Controllers
  • Broadcom BCM5704C Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
  • VGA Port
Super I/O
  • NS PC87427
Clock Generator
  • ICS932S801AG
 
Input / Output
SATA
  • Up to four SATA devices
IDE
  • Single EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100
Floppy
  • 1 Floppy port; 1.44 MB
VGA
  • 1 VGA port
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB Rear Ports
  • 2 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial ports
  • 1 Header
Chassis ( Optimized for H8DSL-HTi )
1U Chassis
Important Chassis Notes
  • To ensure system stability, a 420W (minimum) ATX power supply
    [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
 
Expansion Slots
PCI-X
  • 1 64-bit 133MHz PCI-X (3.3V) slot
HTX
  • 1 HyperTransport Link
  • HTX Support via Riser Card
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST-49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • ACPI 1.0 / 2.0
  • PCI 2.2
  • DMI 2.3
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog / NMI
Power Configurations
  • ACPI Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages (+5V, ±12V, 5V Standby, 2.5V Standby)
  • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
  • Memory Voltage 2.5V
  • CPU switching voltage regulator
  • Supports System Management Utility
FAN
  • Total up to five 3-pin fan headers
  • 5 Fan Status Tachometer monitoring
  • Status Monitor for Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • I2C temperature sensing logic
LED
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Header
  • Chassis Intrusion Detection
 
OS Compatibility

• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8DSL-HTi MBD-H8DSL-HTi-O 1 H8DSL-HTi Motherboard
Manual(s) MNL-H8DSL-HTi - Motherboard Manual for H8DSL-HTi
I/O Cables CBL-0022L
CBL-036L-03
1
1
ATX Floppy Cable
ATA 100/133 IDE LP Cable
Driver Disk CDR-A+SWKS 1 Version 1.01 (or newer) Chipset Driver CD
Retention BKT-0004L
BKT-0005L
2
2
CPU Heat Sink Back Plate
CPU Heat Sink Back Plate
I/O Shield CSE PT7L 1 Motherboard I/O Shield
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 200, Opteron