 | |
 | | SYS-5014C-MT | - SuperServer 5014C-MT (Beige)
| | SYS-5014C-MTB | - SuperServer 5014C-MTB (Black)
| | | |
| | CPU | - Single LGA775 (Prescott) Socket
- Supports an Intel® Pentium® 4 processor 6x0 or 5x0 sequence on 90nm process ONLY (800MHz FSB) - including 2MB Cache Extreme Edition
- Supports an Intel® Celeron® processor (533MHz FSB) with 256 KB L2 cache
- Hyper-Threading enabled
| | System Bus | | | | |
| | Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 4 GB DDR2 400MHz/533MHz unbuffered ECC/non-ECC memory
- Dual channel memory bus
| | Memory Type | - DDR2 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs
| | DIMM Sizes | - 256Mb, 512Mb, 1Gb densities
- 256MB, 512MB, 1GB SDRAM modules
- Total 128MB to 4GB memory capacity
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
| | | |
| | Chipset | - Intel E7221 (Copper River) chipset
- ICH6R + PXH-V
| | Serial ATA | - SATA controller integrated in Intel® ICH6R
- RAID 0, 1, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
| | Network Controllers | - 2x Broadcom BCM5721 Gigabit Ethernet Controllers
- Supports 100/1000BASE-T, RJ45 output
| | Graphics | - Onboard integrated server quality video graphics in MCH
| | Super I/O | | | Clock Generator | | | | |
| | PCI-Express / PCI-X | - 1x 64-bit PCI-X 133MHz slot (Riser card required)
| | | |
| | Serial ATA | - Four Serial ATA ports
- Four SATA hard drives supported
| | IDE | - One EIDE channel supports up to two UDMA / IDE devices
- Supports PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB,
| | LAN | | | USB | - 2x rear USB 2.0 / 1.1 ports
- 4x USB 2.0 / 1.1 internal headers for 4x ports
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial ports
- 1x serial header
| | Parallel Port | | | | |
| | BIOS Type | - 8Mb Flash EEPROM with Award BIOS® 49LF008A/SST
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- DMI 2.3
- ACPI 1.0 (limited)
- BIOS Rescue hot keys
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
| | | | |
| | Form Factor | | | Model | | | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | | | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
| | Ports | - 2x USB Ports (USB 2.0 Ready)
- 1x Serial COM Port
| | |
| | Hot-swap | - 4x 3.5" Hot-swap SATA drive bays
| | |
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
| | |
| | 1x SATA Backplane | | |
| | Fans | | | |
| Fixed 300W AC power supply module w/ PFC
[ 24-pin, (4-pin=12V) ] | | AC Voltage | - 100 - 240V, 60-50Hz, 5 Amp Max
| | DC Output | - 12V1 + 12V2 Current ≤ 20A
- 5V + 3.3V Power ≤ 140W
| | +5V | | | +5V standby | | | +12V1 | | | +12V2 | | | -12V | | | +3.3V | | | | |
| | Safety / EMC | - USA - UL Listed, FCC
- Canada - CUL listed
- Germany - TUV Certified
- Europe/CE Mark
- EN 60950/IEC 60950-Compliant
| | | |
| | CPU | - Monitors for CPU Core, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - Total of five 3-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Low noise fan speed control
| | Temperature | - Monitoring for CPU, chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
| | Other Features | - Chassis intrusion header
- SDDC
| |
