X6DAL-G
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DAL-G ]

Key Features
1. Dual Intel® 64-bit Xeon® Support,
    Up to 3.8 GHz, 800 MHz FSB
2. Intel® E7525 (Tumwater) Chipset
3. Up to 12GB DDR 333 SDRAM (or)
    Up to 24GB DDR 266 SDRAM
4. Intel® 82541GI Gigabit Ethernet
    Controller
5. 2x SATA Ports via 6300ESB
    On-chip SATA Controller
6. 1 (x16) & 1 (x8) PCI-Express,
    2x 64-bit 66MHz PCI-X,
    2x 32-bit 33MHz PCI
7. AC'97 Audio, 6-Channel Sound
8. Fan Speed Low Noise Control

 
Links & Resources
Recommended Chassis
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DAL-G-O
  • X6DAL-G (Standard Retail Pack)
MBD-X6DAL-G-B
  • X6DAL-G (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800MHz system bus
Operating System Software
 
System Memory
Memory Capacity
  • Six 184-pin DIMM sockets
  • Supports up to 12 GB DDR 333 MHz or
  • Supports up to 24 GB DDR 266 MHz
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
 
On-Board Devices
Chipset
  • Intel® E7525 chipset
  • MCH + 6300ESB + 82541GI
SATA
  • 6300ESB support for 2x SATA ports
  • RAID 0, 1, and JBOD support
Network Controllers
  • 1x Intel® 82541GI Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Audio
  • AC'97 audio CODEC with high quality 6-channel sound
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 1x RJ45 LAN port
USB
  • Up to 4 USB 2.0 ports
  • 2x ports, 2x headers
Audio
  • 1x Line In / Line Out / Microphone ports
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
Parallel Header
  • 1 ECP / EEP parallel header (CBL-081)
Chassis ( Optimized for X6DAL-G )
Tower / 4U Rackmount
Important Chassis Notes
  • To ensure system stability, a 420W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 1 (x16) PCI-e slot
  • 1 (x8) PCI-e slot
PCI-X
  • 2x 64-bit 66MHz PCI-X (3.3V) slots
PCI
  • 2x 32-bit 33MHz PCI (5V) slots
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 2.0
 
Management
Software
  • SuperDoctor® III
  • Watch Dog
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Suspend to RAM (STR)
  • CPU Fan auto-off in sleep mode
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of six 4-pin fan headers
  • 6x fans with status monitoring
  • Status monitor with firmware/software on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
  • System Overheat LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC
 
OS Compatibility

• Please see our OS Compatibility Chart
Parts List
  Part Number Qty Description
X6DAL-G MBD-X6DAL-G-O 1 X6DAL-G Motherboard
Manual(s) MNL-07xx 1 Motherboard Manual for X6DAL-G
I/O Cables CBL-022
CBL-036L-02
CBL-044L
1
1
1
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
Driver Disk CDR-INTC 1.20 1 Version 1.20 CD or later
I/O Shield CSE-PT2 1 Motherboard I/O Shield
Retention Module SKT-0159 1 CPU mounting plate

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
** 4GB Memory has not been verified due to temporary module unavailability.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.