X6DVL-INF
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Archived (EOL)   [ X6DVL-INF ]
X6DVL-TG
  • First Infiniband Product
  • Best Product for Server Clusters

Key Features
1. Dual Intel® 64-bit Xeon® Support,
    up to 3.80 GHz, 800 MHz FSB
2. Intel® E7320 Chipset
3. Up to 16GB Registered
    ECC DDR2 400MHz SDRAM
4. Dual Intel® 82541GI Single-port Gigabit
    Ethernet Controllers
5. 2x SATA Ports via 6300ESB
    SATA Controller
6. 1x 64-bit 66MHz PCI-X
7. Mellanox MT25208 with
    Dual Infiniband Ports
8. IPMI 2.0 Support
9. Low Noise Fan Speed Control

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for alternative options.
MBD-X6DVL-INF-O
  • X6DVL-INF (Standard Retail Pack)
MBD-X6DVL-INF-B
  • X6DVL-INF (Bulk Pack)
 
Physical Stats
Form Factor
  • ATX
Dimensions
  • 12" x 10" (30.5cm x 25.4cm)
  • PCB height: 2.44"(62mm)
  • Board height: 1.6"(41mm)
 
Processor/Cache
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
 
System Memory
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 16 GB DDR2 400 MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8V only
Error Detection
  • Supports Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E7320 chipset
  • MCH + 6300ESB + 82541GI
Infiniband
  • Mellanox MT25208 Dual-Port Infiniband with one memory expansion slot supporting 128MB to 1GB unbuffered ECC DDR 266/333MHz SDRAM
SATA
  • 6300ESB SATA Controller (2x Drive support)
  • 2x SATA Ports
  • RAID 0, 1, JBOD support
IPMI
Network Controllers
  • Dual Intel® 82541GI Single Port Gigabit Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS (SST)
BIOS Features
  • Plug and Play (PnP)
  • ACPI 1.0
  • APM 1.2
  • DMI 2.3
  • PCI 2.2
  • SMBIOS 2.3
  • BIOS Rescue Hot Keys
  • USB Legacy Support
  • Hardware BIOS Virus Protection
Chassis ( Optimized for X6DVL-INF )
1U
  • SC811T-420-INF (OEM)
Important Note
  • To ensure system stability, a 420W (minimum) ATX 12V/EPS12V power supply [4-pin (+12V), 8-pin (+12V) and 24-pin] is required for systems built with non-Supermicro chassis / power supplies.
  • Chassis must have CPU mounting holes required for 800MHz FSB CPUs with this serverboard.
 
Expansion Slots
PCI-X
  • 1x 64-bit 66MHz PCI-X (3.3V) slot
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB support
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 header
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores (+3.3V, +5V, ±12V & +5V Standby)
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-1.63V
FAN
  • Total of six 4-pin fan headers
  • 6x fans with status monitoring
  • Status monitor for on/off control
  • Status monitor for speed control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
LED
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Parts List
  Part Number Qty Description
X6DVL-INF MBD-X6DVL-INF-O 1 X6DVL-INF Motherboard
Manual(s) MNL-0814 1 Motherboard Manual for X6DVL-INF
I/O Cables CBL-0010
CBL-022
CBL-036L-02
CBL-044L
1
1
1
1
9-pin Serial Port Cable
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
Driver Disk CDR-INTC 1 Software and Driver CD
I/O Shield CSE-PT7 1 Motherboard I/O Shield
Retention SKT-0159 1 CPU mounting plate

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.