X6QTE+
Super Micro Computer, Inc.
Contact Us

Search

MySupermicro
  Products   Motherboards   Xeon Boards   [ X6QTE+ ]
X6QTE+
Key Features
1. Quad Dual-Core Intel® Xeon®
    Processor 7100 Series Support,
    up to 3.0 GHz, 667/800 MHz FSB
2. Intel® E8501 Chipset
3. Up to 64GB Registered ECC DDR2
    400 SDRAM
4. Dual Intel® 82571EB PCI-e
    Gigabit Ethernet Controllers
5. 2x SATA Ports via ICH5R Controller
    SATA Controller
6. 1 x8 (in x16) PCI-Express
7. ATI ES1000 16MB Graphics
8. IPMI 2.0 Socket

 
Links & Resources
Tested Memory List
Motherboard Manual
Update Your BIOS
Download the Latest Drivers and Utilities
Product SKUs
MBD-X6QTE+-O
  • X6QTE+ (Standard Retail Pack)
MBD-X6QTE+-B
  • X6QTE+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Proprietary ATX
Dimensions
  • 16" x 14.3" (406.4mm x 363.2cm)
 
Processor/Cache
CPU
  • Quad 604-pin FC-mPGA4 Sockets
  • Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
    • Dual-Core Intel® Xeon® Processor 7100 Series with 2MB L2 Integrated Advanced Transfer Cache (CPUs must be 95W or less)
System Bus
  • 667/800 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
Memory Capacity
  • Sixteen 240-pin DIMM sockets
  • Supports up to 64GB Registered ECC DDR2 400MHz memory
  • Dual channel memory bus
  • Memory must be populated in pairs and all be of same type
Memory Type
  • DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 512 MB, 1GB, 2GB, 4GB
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® E8501 chipset
  • MCH + ICH5R + 82571
SATA
  • ICH5R SATA Controller
  • RAID 0, 1, JBOD support
IPMI
Network Controllers
  • Dual Intel® 82571EB Single Port PCI-e Gigabit Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI ES1000 SVGA PCI video controller with 16 MB of video memory
Super I/O
  • National 87427 chip
 
Input / Output
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header
Chassis ( Optimized for X6QTE+ )
1U Chassis
  • CSE-818TQ-1000
Important Chassis Notes
  • To ensure system stability with Quad CPUs, a 1000W (minimum) ATX power supply
    [8-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • To ensure system stability with Cranford Dual Core CPUs, a (800W (TBD)minimum) ATX power supply
    [8-pin (+12V), 8-pin (+12V) and 24-pin are required]
  • Chassis must have CPU mounting holes required for CPUs with this serverboard.
 
Expansion Slots
PCI-Express
  • 1 x8 (in x16) PCI-e slot
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • SMBIOS 2.3
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0
  • ACPI 1.0 (limited)
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI/APM Power Management
  • Main Switch Override Mechanism
  • Wake-On-Ring (WOR) header
  • Wake-On-LAN (WOL) header
  • Power-on Mode for AC Power Recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
  • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
FAN
  • Total of nine 3-pin fan headers
  • 9x fans with status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Supports 3-pin Fans
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • I2C Temperature Sensing Logic
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Parts List
  Part Number Qty Description
X6QTE+ MBD-X6QTE+-O 1 X6QTE+ Motherboard
Manual(s) MNL-0904 1 Motherboard Manual for X6QTE+
I/O Cables CBL-0022L
CBL-0036L-03
CBL-0044L
1
1
2
ATX Floppy Cable
ATA 66/100 IDE LP Cable
2ft. Amphenol, SATA Cable
Driver Disk CDR-INTC-Q 1 Version 1.00 or later
I/O Shield CSE-PT07L 1 Motherboard I/O Shield

Note:  Items in a Standard Retail Package may differ from items in a Standard Bulk Package.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.