 |  | SKU | | |  |  | Form Factor |  | Extended ATX |  | Dimensions |  | 12" x 13.05" (30.5cm x 33.2.cm) |  |  |  | CPU |  | • Dual mPGA604 ZIF Sockets • Supports up to two Intel® Xeon® processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz |  | System Bus |  | 533MHz/400MHz system bus |  |  |  | Memory Capacity |  | • Six 184-pin DIMM sockets • Supports up to 12 GB DDR266/200 memory • Dual channel memory bus • Memory must be populated in pairs |  | Memory Type |  | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |  | DIMM Sizes |  | 256 MB, 512 MB, 1 GB, 2 GB |  | Memory Voltage |  | 2.5 V only |  |  |  | Chipset |  | • Intel® E7501 chipset • MCH + ICH3-S + P64H2 |  | Serial ATA |  | • Adaptec AIC-8120: Marvell® 88SX5081 8-port Hercules-1, rev C0, SATA Controller (8x Drive support) • 8 Serial ATA ports • RAID 0, 1, 10 Supported (in a 4-Drive + 1 hot-spare configuration) |  | SATA Zero-Channel RAID |  | • Support for Zero-Channel RAID with Adaptec 2020SAH1 (SATA) ZCR Card: 1A, 3.3V, Low Profile 2.5" x 6.6", 400MHz I/O processor, 64MB ECC DDR memory on board • [Card not included] • RAID 0, 1, 5, 10, JBOD |  | IPMI |  | Support for Intelligent Platform Management Interface v.1.5 (Optional) |  | Network Controllers |  | • 1x Intel® 82545 Gigabit Ethernet • 1x Intel® 82551 10/100M Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |  | Graphics |  | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |  |  |  | PCI Expansion |  | • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot • 2x 64-bit 100/66MHz PCI-X (3.3V) slots • 3x 32-bit 33MHz PCI (5V) slots |  | IDE |  | • Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |  | USB |  | Up to 5 USB ports |  | Serial Ports |  | 2 Fast UART 16550 serial ports |  | Parallel Port |  | 1 ECP / EEP parallel port |  | Floppy |  | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |  | Keyboard / Mouse |  | PS/2 keyboard and mouse ports |  | |  |  |  | 3U Chassis |  | • SC832T-R760 |  | Rackmount Tower / 4U |  | • SC742T-550 |  | Important Note |  | To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required. |  |  |  | BIOS Type |  | 4Mb Flash EEPROM with Phoenix® BIOS |  | BIOS Features |  | • Plug and Play (PnP) • SMBIOS 2.3 • DMI 2.1 • ACPI 1.0 • Hardware BIOS virus protection |  |  |  | Software / Hardware |  | • Optional IPMI (Intelligent Platform Management Interface) 1.5 • SuperDoctor® III • Watch Dog |  | Power Configurations |  | • ACPI/APM Power Management • Main Switch Override Mechanism • Wake-On-Ring (WOR) header • Wake-On-LAN (WOL) header • Keyboard Wakeup from Soft-Off • CPU Fan auto-off in sleep mode • Power-on mode control for AC power loss recovery • Internal/External modem remote ring-on |  |  |  | Voltage |  | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby • CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V • Adjustable CPU clock frequency ratio settings (via BIOS) |  | FAN |  | • Total of six 3-pin fan headers • 3x fans with tachometer monitoring • Overheat backup fan connector • Status monitor with firmware/software on/off control |  | Temperature |  | • Monitoring for CPU, chassis, environment • CPU thermal trip support |  | LED |  | • CPU Overheat LED • System Overheat LED • Suspend-state indicator LED |  | Other Features |  | • Chassis intrusion detection • Chassis intrusion header • Chipkill support |  | |