 | |
 | | MBD-X7SPE-H-D525 -O | - X7SPE-H-D525 (Standard Retail Pack)
| | MBD-X7SPE-H-D525 -B | | | | | | Form Factor | | | Dimensions | - 7.5" x 6.75" (19.05cm x 17.15cm)
| | | | | CPU | - Intel® Atom™ D525 processor
| | System Bus | | | | | | Memory Capacity | - Two 204-pin SO-DIMM slots
- Supports up to 4 GB of unbuffered, non-ECC DDR3 800MHz SO-DIMM (Single Channel)
- Some 1066MHz and 1333MHz memory can be used, but will operate at 800MHz
Note: Supports 1-Gb and 2-Gb devices only - Intel D525 Memory Requirements | | Memory Type | - DDR3 800MHz unbuffered, non-ECC SO-DIMM
| | DIMM Sizes | - 256 MB, 512 MB, 1 GB, 2GB
| | Memory Voltage | | | | | | Chipset | | | SATA | - Intel ICH9R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
| | Network Controllers | - 2x Intel 82574L Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
| | Graphics | - Onboard Intel GMA3150 video
| | Super I/O | | | | | | Serial ATA | - 6 Serial ATA ports ( 3Gb/s )
| | LAN | | | USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 5 via headers + 1 Type A connector
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
| | | | | BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
| | | | | | | PCI-Express | - 1 (x4) PCI-Express (in x16 slot)
| | | | | Software | | | Power Configurations | - ACPI/APM Power Management
- Main Switch Override Mechanism
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
| | | | | Voltage | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
- CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
| | FAN | - Total of two 4-pin fan headers
- 2 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 2 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
| | LED | - CPU / System Overheat LED
| | Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
| | | |
| | Environmental Spec. | - Operating Temperature: 0°to 55°C
- Non-operating Temperature: -40°to 70°C
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
| | | |
| | FCC | | |
