A+ Server 4021M-T2R+ / 4021M-T2R+B
  A+ Products  Systems   Tower   [ 4021M-T2R+ / 4021M-T2R+B ]








Integrated Board
Super H8DME-2


Key Features

1. Two Six-Core AMD Opteron™ 2000

    Series (Socket F) processor support;

    HT3.0 Link support
2. Up to 128GB DDR2 800/667/533

    SDRAM; 16 DIMM Sockets
3. 2 x8 PCI-e,

    2 64-bit 133/100MHz PCI-X,

    2 64-bit 100MHz PCI-X
4. nVidia MCP55 Pro / NEC uPD720400 Chipset
5. 8 x 3.5" Hot-swap SATA Drive Bays
6. Dual-port Gigabit

    LAN/Ethernet Controller
7. 800W Redundant Power Supply


Available Colors: Black     Beige    


 Drivers & Utilities       BIOS       Manuals

 Tested Memory List     


Product SKUs
AS-4021M-T2R+
  • A+ Server 4021M-T2R+ (Beige)
AS-4021M-T2R+B
  • A+ Server 4021M-T2R+B (Black)
 
Motherboard
Super H8DME-2
 
Processor/Chipset
CPU
  • Dual 1207-pin Socket F
  • Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
  • Dual-core Support
  • HT3.0 Link support
Chipset
  • nVidia MCP55 Pro
  • NEC uPD720400
 
System Memory
Memory Capacity
  • 16x 240-pin DIMM sockets support up to

      128GB DDR2 800/667/533/400 SDRAM *
  • For Single CPU: Memory must be populated in CPU1 DIMMs only
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  • Dual channel memory bus
Memory Type
  • DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.8V only
 
On-Board Devices
SATA
  • nVidia MCP55 Pro SATA2 3.0Gbps Controller
  • 6 SATA Ports
  • nVidia RAID 2.0
  • SATA RAID 0, 1, 0+1, 5, JBOD Support
IPMI
Network Controllers
  • nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI ES1000 Graphics Controller
Super I/O
  • Winbond 83627HF
 
Input / Output
SATA
  • 6 SATA2 ports
IDE
  • Single EIDE channel support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA 100/133
Floppy
  • 1 Floppy port; 1.44 MB support
LAN
  • 2 RJ45 LAN ports
USB
  • FUCI
  • Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
  • 2 Rear Ports
  • 4 Internal Headers
VGA
  • 1 VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1 Fast UART 16550 serial port
  • 1 serial port header
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • BIOS Rescue Hot Keys
  • USB Keyboard Support
  • Hardware BIOS Virus Protection
  • SMBIOS 2.3
Chassis
Form Factor
  • Tower / 4U Rackmountable
  • Optional Rackmount Kit (CSE-PT26)
Model
 
Dimensions
Height
  • 7.0" (178mm)
Width
  • 17.2" (437mm)
Depth
  • 25.5" (648mm)
Gross Weight
  • -
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Drive Bays
Hot-swap
  • 8 x 3.5" Hot-swap (SAS / SATA) Drive Bays
Peripheral Bay(s)
  • 2x 5.25" Peripheral Drive Bay
  • 1x 5.25" Bay For Floppy Drive
 
Expansion Slots
PCI-Express
  • 2 x8 PCI-e slots
PCI-X
  • 2 64-bit 133/100MHz PCI-X (3.3V) slots
  • 2 64-bit 100MHz PCI-X (3.3V) slot
IPMI
  • IPMI 2.0 expansion slot
 
SATA Backplane
SATA Hard Drive Backplane
 
System Cooling
Fans
  • 3x 5000 RPM Hot-Swappable Cooling Fans
  • 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
Shrouds
  • 1x Air Shroud
 
Power Supply and Distributor
800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 10-4 Amp
+5V standby
  • 4 Amp
+12V
  • 66 Amp
With Power Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
  • CPU 4-Phase-switching voltage reulator
FAN
  • Total up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • Stauts monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal Control for 8x Fan Connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • Suspend-State Indicator LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-H8DME-2

CSE-745TQ-R800(B)
1

1
Super H8DME-2 Motherboard

4U SC745TQ-R800 Chassis (B = Black)
Cable(s) CBL-0061L

CBL-0084

CBL-0087

CBL-0157L

CBL-0160L

CBL-0209L
6

1

1

2

1

1
35cm SATA Cable

6" 16-pin Front Control Split Cable

20" 16-pin to 16-pin Round Ribbon Cable

8-Pin to 8-Pin Ribbon Cable for SGPIO

Power Cord

210mm 4-pin to 3-pin Fan Power Cable
Fan(s) FAN-0072L

FAN-0081L
3

2
5000 RPM Hot-Swappable Cooling Fan

5000 RPM Hot-Swappable Rear Exhaust Fan
Hard Drive CSE-PT17(B)

CSE-SAS-743TQ
8

1
1" Hard Drive Carrier Trays (B = Black)

SAS / SATA Hard Drive Backplane with AMI MG9072 Chip
Heatsink Components SNK-P0023P 2 Passive Heatsink for AMD Socket F CPUs
Power Supply PWS-801-1R

CSE-PT745-PDN24

CSE-PT0130
2

1

1
SP801-1R 800W Power Supply (Redundant)

Power Supply Backplane

Dummy Power Cover
Air Shroud CSE-PT0123 1 Air Shroud
Optional Parts List
  Part Number Qty Description
Mounting Rails CSE-PT26 - SC748 4U Chassis Mounting Rails
Peripheral Drives FPD-PNSC-02 (01) 1 Panasonic 3.5" 1.44MB Floppy Drive (01 = Black)


  * Fully populated DDR2 800 or 667 will be downgraded to DDR2 533
Information in this document is subject to change without notice.

Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Page Viewed: