A+ Server 1122GG-TF
Print





Integrated Board
H8DGG-QF
Available Colors: Black    
 Drivers & Utilities
 BIOS
 IPMI
 Tested MEM
 Tested HDD
 Manuals
 OS Certification Matrix
 Compatible GPU List
Note: Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.


Key Features

1. Dual AMD Opteron™ 6000 series

    processors (Socket G34)

    16/12/8/4-Core ready; HT3.0 Link

    support
1. 2x double-width full-height/length

    GPU cards supported; (GPU cards

    not included)
3. Up to 512GB DDR3 Registered ECC

    1600/1333/1066 SDRAM in 16 DIMMs
4. 2x full-height full-length PCI-e Gen 2.0

    x16 slots; 1x low-profile PCI-e x8

    Gen 2.0 in x16 slot (accommodates

    AOCs up to 6" in length)
5. Dual-port GbE LAN Controller, 4x

    USB 2.0 ports, 1x dedicated LAN for

    system management (IPMI2.0)
6. 6x 2.5" Hot-swap SATA Drive Bays
7. 1400W High-efficiency Power Supply

    Gold Certified
8. 1x Low-profile PCI-E 2.0 in x16 slot

    (For add-on card up to 5.9"in length)


Specifications
Product SKUs
AS-1122GG-TF
  • A+ Server 1122GG-TF (Black)
 
Motherboard
Super H8DGG-QF
 
Processor/Chipset
CPU
  • Dual 1944-pin Socket G34
  • Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
Chipset
  • Dual AMD chipset SR5690 + SP5100
Note
  • Supports 6000 processors with Max ACP 80W (TDP 115W) at 30°C
 
System Memory
Memory Capacity
  • Sixteen DIMM sockets
  • Support up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs*
  • Quad channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 controller, Dual-Port

      Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200 16MB DDR2
Super I/O
  • Winbond® W83527 chip
 
Expansion Slots
1U
  • 2/1 PCI-E 2.0 x16/x8 in x16 (2 GPU)
 
Input / Output
SATA
  • 6x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 4x USB 2.0 ports
  • 2x Rear and 2x header
VGA
  • 1x VGA port
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.2" (716mm)
Gross Weight
  • 38 lbs (17.2 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /

    UID LED
 
Drive Bays
Hot-swap
  • 6x 2.5" Hot-swap SATA drive bays
  • Enterprise SATA HDD only recommended
 
Backplane
SATA HDD Backplane
System Cooling
Fans
  • 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
 
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output

+5V standby
  • 4 Amp
DC Output

+12V
  • 100 Amp @ 100-140V
  • 117 Amp @ 180-240V
Certification Gold Certified

  Gold Certified

  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 8-fan status tachometer monitoring
  • Up to eight 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control

     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:

       10°C to 30°C (50°F to 86°F)
  • Non-operating Temperature:

       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:

       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:

       5% to 95% (non-condensing)
Parts List
A+ Server 1122GG-TF

Certain products may not be available in your region