H8SCM-F
Supermicro, Inc.

   
  A+ Products   Motherboards   [ H8SCM-F ]

Key Features
1. Single AMD Opteron™ 4000 series
    processor (Socket C32) 8/6/4 -Core
    ready; HT3.0 Link support
2. AMD SR5650 / SP5100 Chipset
3. Up to 128GB DDR3 1600MHz ECC
    Registered DIMM; 4x DIMM sockets
4. Two Intel® 82574L controllers,
    Two single-port Gigabit Ethernet
5. 6x SATA2 3.0 Gbps Ports via
    AMD SP5100 controller, RAID 0, 1, 10
6. Expansion slot:
    1 PCI-E 2.0 x8 (in x16 slot)
    1 PCI-E 2.0 x8
    1 PCI-E 2.0 x4 (in x8 slot)
    1 PCI
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 + KVM with
    dedicated LAN
9. 7x USB 2.0 ports (2x rear / 2x header
    - 4 ports / 1x Type-A)
8. IPMI 2.0 with Dedicated LAN support

 
Links & Resources
Tested Memory List
Tested HDD List
Motherboard Manual
Update Your BIOS
IPMI Firmware
Download the Latest Drivers and Utilities
Download Driver CD
OS Compatibility

   

Product SKUs
MBD-H8SCM-F
  • H8SCM-F (Standard Retail Pack)
 
Physical Stats
Form Factor
  • Micro ATX Form
Dimensions
  • 9.6" x 8.6" (24.4cm x 21.8cm)
 
Processor/Chipset
CPU
  • Single 1207-pin Socket C32
  • Supports one 8/6/4-Core ready AMD Opteron™ 4000 Series processors
Chipset
  • AMD chipset SR5650/SP5100
 
System Memory
Memory Capacity
  • Four DIMM sockets
  • Supports up to 128GB Registered ECC or 32GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 4 DIMMs
  • Dual channel memory bus
  • See Detailed Memory Support Matrix
Memory Type
  • DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.35V or 1.5V
 
On-Board Devices
SATA
  • AMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Two Intel® 82574L controllers
      Two single-port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGA
  • Matrox G200eW 16MB DDR2
Super I/O
  • Winbond® W83527HG chip
 
Input / Output
SATA
  • 6x SATA (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 7x USB 2.0 ports
  • 2x Rear, 2x header (4 ports), 1x Type A
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2x Fast UART 16550 serial port
      (one header & one port)
Others
  • 1 SATA DOM power connector, TPM header
 
Expansion Slots
PCI-E/PCI
  • 1 PCI-E 2.0 x8 (in x16 slot)
  • 1 PCI-E 2.0 x8
  • 1 PCI-E 2.0 x4 (in x8 slot)
  • 1 PCI
IPMI
  • IPMI 2.0 expansion slot
Chassis ( Optimized for H8SCM-F )
1U Chassis
1U
  • SC512, SC513, SC811, SC813M,
      SC111, SC113M
Mid-Tower
  • SC731, SC733
 
System BIOS
BIOS Type
  • 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 
Management
Software
Power Configurations
  • ACPI Power Management
  • Wake-On-LAN (WOL) header
  • Keyboard Wakeup from Soft-Off
  • Power-on mode control for AC power loss recovery
 
PC Health Monitoring
CPU
  • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
  • CPU switching voltage regulator
FAN
  • Up to 5-fan status tachometer monitoring
  • Up to five 4-pin fan headers
  • Status monitor for speed control
  • 3-pin fan support (w/o speed control)
  • Low noise fan speed control
     (4-pin fan only)
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip Support
  • Thermal control for 8x Fan connectors
  • I2C Temperature Sensing Logic
LED
  • CPU / System Overheat LED
  • +5V Standby Alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
Operating Environment / Compliance
RoHS

RoHS 6/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
 
OS Compatibility
• Please see our OS Compatibility Chart
 
Regulatory
FCC
  • Passed to meet FCC standard requirement
Retail Pack List
  Part Number Qty Description
H8SCM-F MBD-H8SCM-F -O 1 H8SCM-F Motherboard
Retention BKT-0012L 1 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 3 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)

Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Page Viewed:
AMD, AMD Motherboard, AMD Opteron, Opteron 2000, Opteron, SocketF, Socket F